1)RC Single-stage Drive Helical Gear Boxes
2)Explosion-proof motor.
3)Hard teeth surface(HRC62)
4)ISO & CE Approval
RC Single-stage Drive Helical Gear Boxes
1) R series gear speed reducers are based on the building block design, so it is convenient for them to fit all types of motors or to connect with other power input. And it is possible to combine with other type of machines.
2) Ratio: 1-stage is 1.6~6.3.
3)
Solid shaft output.
4) For different type machine.
5) Permit the positive opposite side revolves.
6) Mounting type: Foot-mounted, flange-mounted, horizontal or vertical installation.
Products features
Parallel output
Small size
Small ratio
High output speed
Small energy loss
Low noise
Foot-mounted, low centre-high, average efficiency 98%
Rotation direction of input shaft is reverse to that of output shaft
Tuesday, September 6, 2011
gear box
1.CE ISO9001 certification
2.export in EU Americal
3.20years'experience in gearbox feild
4.maximum utilization of housing
Key Specifications/Special Features:
1. Small off-center output and compact structure
2. Maximum utilization of housing space
3. Integral casting housing with good rigidity to
enhance the shaft strength and service life of bearing
4. Types of installation and output base
5. Big or small flange type installation and output
through solid shaft
6. Input types: Couple-type motor, input through shaft
and input through coupling flange
7. Speed reducing ratio:
8. Two-stage: 5-24.8
9. Three-stage: 27.2-264
10. Average efficiency: 96%
11. Two-stage: 96%
12. Three-stage: 94%
2.export in EU Americal
3.20years'experience in gearbox feild
4.maximum utilization of housing
Key Specifications/Special Features:
1. Small off-center output and compact structure
2. Maximum utilization of housing space
3. Integral casting housing with good rigidity to
enhance the shaft strength and service life of bearing
4. Types of installation and output base
5. Big or small flange type installation and output
through solid shaft
6. Input types: Couple-type motor, input through shaft
and input through coupling flange
7. Speed reducing ratio:
8. Two-stage: 5-24.8
9. Three-stage: 27.2-264
10. Average efficiency: 96%
11. Two-stage: 96%
12. Three-stage: 94%
National Patent Industrial Gearbox
industrial gearbox
1. 55.85HP;ratio: 27 i
2. Concrete Mixer gearbox;
3. Good quality; low noise; mature Techniques;
industrial gearbox
Agitator Power Transmission Gearbox (has obtained the national patent) is a majorpart for power transmission on Double-horizontal-shaft Concrete Mixer.It has characteristics of big torque, low noise, high efficiency, stable transmission and longservice life.
Code Gear Power Output Input Speed Input Weight Rotation
Ratio(i) (HP) Torque(Nm) (r.p.m) Torque(Nm) (kg) Direction
XHG30.27000.01L 27 55.85 18000 800 667 222 leftXHG30.27000.01R 27 55.85 18000 800 667 222 right
1. 55.85HP;ratio: 27 i
2. Concrete Mixer gearbox;
3. Good quality; low noise; mature Techniques;
industrial gearbox
Agitator Power Transmission Gearbox (has obtained the national patent) is a majorpart for power transmission on Double-horizontal-shaft Concrete Mixer.It has characteristics of big torque, low noise, high efficiency, stable transmission and longservice life.
Code Gear Power Output Input Speed Input Weight Rotation
Ratio(i) (HP) Torque(Nm) (r.p.m) Torque(Nm) (kg) Direction
XHG30.27000.01L 27 55.85 18000 800 667 222 leftXHG30.27000.01R 27 55.85 18000 800 667 222 right
HK (A F)47 helical-bevel reducer
1:Out-put shaft is vertical with the in-put shaft
2:All purpose use,high efficiency
(reducer)(gear box)(helical gearbox)
Generallntroduction of HK series:
reducer)(gear box)(helical gearbox)
The HK series gear units, are novel transmission device and composed of Y series motor, helical gear,Gelisen arc gear and worm gear. The gears are made of high wear-resisting alloy materials, specially and finely processed.
Advantages:
1:Compact design, small volume, nice appearance ,and strong capacity of being overloaded.
2:Precise division and wide selection for transmission ratio.
3:The efficiency is up to as high as 96% with low energy consumption, strong adaptability and is capable of working continually in corrosive or damp environment.
4:All- purpose use, convenient and low-cost ma intenance.
5:New seal device, strong adaptability.
6:The HK Series can match with general Y series motor, Y2 series motor, overload motor, Brake motor, frequency conversion motor,DC motor, outdoor special purpose motor.
7:Varied range of motor combinations, mouting positions and struture projects.
Tips:
More details, pls contact us freely.
2:All purpose use,high efficiency
(reducer)(gear box)(helical gearbox)
Generallntroduction of HK series:
reducer)(gear box)(helical gearbox)
The HK series gear units, are novel transmission device and composed of Y series motor, helical gear,Gelisen arc gear and worm gear. The gears are made of high wear-resisting alloy materials, specially and finely processed.
Advantages:
1:Compact design, small volume, nice appearance ,and strong capacity of being overloaded.
2:Precise division and wide selection for transmission ratio.
3:The efficiency is up to as high as 96% with low energy consumption, strong adaptability and is capable of working continually in corrosive or damp environment.
4:All- purpose use, convenient and low-cost ma intenance.
5:New seal device, strong adaptability.
6:The HK Series can match with general Y series motor, Y2 series motor, overload motor, Brake motor, frequency conversion motor,DC motor, outdoor special purpose motor.
7:Varied range of motor combinations, mouting positions and struture projects.
Tips:
More details, pls contact us freely.
spiral bevel gearbox--25M
RN-2M,4M,6M,7M,8M,10M,12M,16M,20M,25M
RN-2M,4M,6M,7M,8M,10M,12M,16M,20M,25M
2.Configuration: bevel gears(vertical mounting),bearing,housing,drive shaft
3.Material: Bevel gear is made of alloy steel SCM415,and dealt with carburized hardening,it has high-steel and wear-resistance.Housing is made of cast iron
4. Speed ratio: 1:1,1:2(reduce speed), gear transmission efficiency up to 95%
5. Features: Right angle or 90 degree to change the transmission directions.
6. Transmission directions: 42 kinds of transmission directions for selections
7. Input Power: 0.014~335 KW
8. Input Revolutions: 10~1450 RPM(revolutions per minute)
9.Feature:
The compact design provides a small box size with a low weight
save more energy as compared to worm gears and are available in varying gear ratios
10.Applia nce: textile, food, medicine, printing, packaging and packing machines
RN-2M,4M,6M,7M,8M,10M,12M,16M,20M,25M
2.Configuration: bevel gears(vertical mounting),bearing,housing,drive shaft
3.Material: Bevel gear is made of alloy steel SCM415,and dealt with carburized hardening,it has high-steel and wear-resistance.Housing is made of cast iron
4. Speed ratio: 1:1,1:2(reduce speed), gear transmission efficiency up to 95%
5. Features: Right angle or 90 degree to change the transmission directions.
6. Transmission directions: 42 kinds of transmission directions for selections
7. Input Power: 0.014~335 KW
8. Input Revolutions: 10~1450 RPM(revolutions per minute)
9.Feature:
The compact design provides a small box size with a low weight
save more energy as compared to worm gears and are available in varying gear ratios
10.Applia nce: textile, food, medicine, printing, packaging and packing machines
GTM-5FT Rotary cutter gearbox
1.Ratio,1:1.46
2.Housing Material,Grey Iron
3.Gear Material,20CrMnTi
4.Weight,17KG.
Rotary cutter, agriculture machine,farm machine,slasher gearbox
Specifications:
Speed Ratio:1:1.46
Input:1000RPM; 30KW; 60HP-CV;286NM
Output:1470RPM; 194NM
Weight: 38Kg
30pcs/ctn,128*90*65/ctn
Gearbox housing material: Grey Iron
2.Housing Material,Grey Iron
3.Gear Material,20CrMnTi
4.Weight,17KG.
Rotary cutter, agriculture machine,farm machine,slasher gearbox
Specifications:
Speed Ratio:1:1.46
Input:1000RPM; 30KW; 60HP-CV;286NM
Output:1470RPM; 194NM
Weight: 38Kg
30pcs/ctn,128*90*65/ctn
Gearbox housing material: Grey Iron
GUOMAO--GRX Series Helical Gear Box
GR series geared motor is foot mounted units of two or three stages helical gears.Thirteen type sizes from GR17 to GR167.
GRX series geared motor
1.Highly standard modular designed: The products are easily connected with and driven by different types of motors or other kinds of input power.The same type geared motor can be adapted to optioned powers of motors. It is therefore easy to realize different solutions for varied requirements.
2.Ratio:Featured many closely divided ratios and wide range of them.Very bib final ratios can be obtained through combined unites to reach extremely low output speeds.
3.Mounting arrangement:No strict limitation to the mounting arrangement.
4.High strength,compact dimension:Housings are made of high strength cast iron.Gears and shaft gears are finished with gas carburising process and precise groundi ng to sequentially get high loading capacity of per certain volume.
5.Long service life:Under the condition of accurately selecting type size and the normal maintenance and use,main as up to more than 25,000 hours.Easily-disabled parts include lubricating oil,oil seals,and bearings.
6.Low noise:All key compents are finished by precisely machining,accurate assembly, and finally tested, and therefore, fairly low noise is reached.
7.High Efficiency:The efficiency of gear unit can reach 95%,The efficiency of worm gear unit can reach 89%...
8.Large radial loading ability.
9.Axial load ability of up to 5% of radial load.
GRX series geared motor
1.Highly standard modular designed: The products are easily connected with and driven by different types of motors or other kinds of input power.The same type geared motor can be adapted to optioned powers of motors. It is therefore easy to realize different solutions for varied requirements.
2.Ratio:Featured many closely divided ratios and wide range of them.Very bib final ratios can be obtained through combined unites to reach extremely low output speeds.
3.Mounting arrangement:No strict limitation to the mounting arrangement.
4.High strength,compact dimension:Housings are made of high strength cast iron.Gears and shaft gears are finished with gas carburising process and precise groundi ng to sequentially get high loading capacity of per certain volume.
5.Long service life:Under the condition of accurately selecting type size and the normal maintenance and use,main as up to more than 25,000 hours.Easily-disabled parts include lubricating oil,oil seals,and bearings.
6.Low noise:All key compents are finished by precisely machining,accurate assembly, and finally tested, and therefore, fairly low noise is reached.
7.High Efficiency:The efficiency of gear unit can reach 95%,The efficiency of worm gear unit can reach 89%...
8.Large radial loading ability.
9.Axial load ability of up to 5% of radial load.
WPS 40 50 60 70 80 100 120 135 155 175 200 250 gear box
WPS Gear box
2,23 years experience
3,Full ranges of Gear Box
4.Size:40 50 60 70 80 100 120 135 155 175 200 250
5.Ratio:10-60
1,Our factory make WPS Gear box
2,23 years experiences
3,Full ranges of Worm Gear Box
4.Size:40 50 60 70 80 100 120 135 155 175 200 2505.Ratio:1/10-1/60
6.Input power:ranging from 0.12 to 33.2kw
7.Output torque ranges from 19 to 2745N.m
Features:
1)High quality aluminum alloy Motovario like gear box,light weight and non-rusting
2)Large output torque,stable transmission with lower noise
3)High heat-radiating dfficiency,elegant shape,durable service life and small size
4)Suitable for omni-bearing installation
2,23 years experience
3,Full ranges of Gear Box
4.Size:40 50 60 70 80 100 120 135 155 175 200 250
5.Ratio:10-60
1,Our factory make WPS Gear box
2,23 years experiences
3,Full ranges of Worm Gear Box
4.Size:40 50 60 70 80 100 120 135 155 175 200 2505.Ratio:1/10-1/60
6.Input power:ranging from 0.12 to 33.2kw
7.Output torque ranges from 19 to 2745N.m
Features:
1)High quality aluminum alloy Motovario like gear box,light weight and non-rusting
2)Large output torque,stable transmission with lower noise
3)High heat-radiating dfficiency,elegant shape,durable service life and small size
4)Suitable for omni-bearing installation
marine gearbox.speed reducer(WL135)
marine gearbox,speed reducer(WL135):the products have passed the certificate of ISO9001:2000
marine gearbox,speed reducer(WL135):
Model:WL135/WLJ135
1. Power/Rated Speed(kw/rpm): 100/1000---200/2000(WL135)
120/1000---240/2000(WLJ135)
2. Reduction ratio: 2:1---4.5:1(WL135)
2:1---6:1(WLJ135)
3. Transmision capacity(kw/min-1): 0.10----0.07(WL135)
0.12---0.084(WLJ135)
4. Center distance(mm): 225(WL135)/(WLJ135)
5. N/W(kg): 470(WL135)
490(WLJ135)
6. Matched engine: 6135Ca,h615,NT-855-M240(WL135)
6135Ca(WLJ135)
marine gearbox,speed reducer(WL135):
Model:WL135/WLJ135
1. Power/Rated Speed(kw/rpm): 100/1000---200/2000(WL135)
120/1000---240/2000(WLJ135)
2. Reduction ratio: 2:1---4.5:1(WL135)
2:1---6:1(WLJ135)
3. Transmision capacity(kw/min-1): 0.10----0.07(WL135)
0.12---0.084(WLJ135)
4. Center distance(mm): 225(WL135)/(WLJ135)
5. N/W(kg): 470(WL135)
490(WLJ135)
6. Matched engine: 6135Ca,h615,NT-855-M240(WL135)
6135Ca(WLJ135)
Stubble Cleaner Gearbox
stubble cleaner gearbox
1. ratio:1.46:1; 23HP;
2. High quality, low noise;
3. 20 years' history
4. Export to Europ & America
stubble cleaner gearbox
This series Agricultural gear reducer is self-developed.
Has the characteristics of high universality,simple structure ,good performance.
1. ratio:1.46:1; 23HP;
2. High quality, low noise;
3. 20 years' history
4. Export to Europ & America
stubble cleaner gearbox
This series Agricultural gear reducer is self-developed.
Has the characteristics of high universality,simple structure ,good performance.
Sunday, September 4, 2011
TA40(Nomimal ratio iN=20)
1:Shaft mounted,hung work
2:Compact design,small volume
3:Excellent function
(gearbox)(gearbox)(reducer)
Design characteristics:
1:Use low-carbon alloyed steel cementation processing completely.
2:The gear and the gear shft precision is high.
3:The volume small,but the torque is big.
(gearbox)(gearbox)(reducer)
Technical data:
Model:HXG40-40D,HXG40-45D
Output speed n2(RPM):71
Rated output torque Mn2(Nm):780
Rated input power Pn1(KW):6.1
Overhung loads Rn1(N):850
Maintence:
After 300-hour operation, please change the oil, and flush the gear uint with suitable detergents.
Pls do not mix the mineral oil and synthetic oil.
pls check the oil level in regular time.
Storage:
1:Pls do no t store in outdoor.
2:pls put cardboard, wood or other material between the products and floor. the gear box cannot directly touch the floor.
Package:
Tips:
If you have any question, pls contact us freely.
2:Compact design,small volume
3:Excellent function
(gearbox)(gearbox)(reducer)
Design characteristics:
1:Use low-carbon alloyed steel cementation processing completely.
2:The gear and the gear shft precision is high.
3:The volume small,but the torque is big.
(gearbox)(gearbox)(reducer)
Technical data:
Model:HXG40-40D,HXG40-45D
Output speed n2(RPM):71
Rated output torque Mn2(Nm):780
Rated input power Pn1(KW):6.1
Overhung loads Rn1(N):850
Maintence:
After 300-hour operation, please change the oil, and flush the gear uint with suitable detergents.
Pls do not mix the mineral oil and synthetic oil.
pls check the oil level in regular time.
Storage:
1:Pls do no t store in outdoor.
2:pls put cardboard, wood or other material between the products and floor. the gear box cannot directly touch the floor.
Package:
Tips:
If you have any question, pls contact us freely.
cylindrical worm gear reducer with M vertical
Our company can supply M vertical cylindrical worm reducers.
Our company can supply M vertical cylindrical worm reducers.
This series reducers include two grade reducing transmission, the first belt driving and the second Archinmedes cylindtical worm screw and wheel driving. The structure guarantees property as larger transmission ratio, stable operation and no noise,the interlock system is equipped if the angle of worm screw is too low.
This series reducer are applied as vertical reducing equipment in chemical industry(mixer with strong shaking indoor), and enamel reaction vessels. The driect operation is preferable.
Our company can supply M vertical cylindrical worm reducers.
This series reducers include two grade reducing transmission, the first belt driving and the second Archinmedes cylindtical worm screw and wheel driving. The structure guarantees property as larger transmission ratio, stable operation and no noise,the interlock system is equipped if the angle of worm screw is too low.
This series reducer are applied as vertical reducing equipment in chemical industry(mixer with strong shaking indoor), and enamel reaction vessels. The driect operation is preferable.
gearbox
gearbox ,for butterfly valves, or other valves
gearbox, made from cast iron or ductile iron , body may also be aluminum, with handwheel
gearbox, made from cast iron or ductile iron , body may also be aluminum, with handwheel
Helical gearbox
gearbox
1. Small off-center output
2. Maximum utilization of housing space
3. Integral casting housing with good rigidity
gearbox's Special Features:
1. Small off-center output and compact structure
2. Maximum utilization of housing space
3. Integral casting housing with good rigidity to enhance the shaft strength and service life of bearing
4. Types of installation and output base
5. Big or small flange type installation and output through solid shaft
6. Input types: Couple-type motor, input through shaft and input through coupling flange
7. Speed reducing ratio: 1-30
Average efficiency: 98%
1. Small off-center output
2. Maximum utilization of housing space
3. Integral casting housing with good rigidity
gearbox's Special Features:
1. Small off-center output and compact structure
2. Maximum utilization of housing space
3. Integral casting housing with good rigidity to enhance the shaft strength and service life of bearing
4. Types of installation and output base
5. Big or small flange type installation and output through solid shaft
6. Input types: Couple-type motor, input through shaft and input through coupling flange
7. Speed reducing ratio: 1-30
Average efficiency: 98%
TA100(Nomimal ratio iN=5,n1=500rpm)
1:Shaft mounted,hung work
2:Compact design,small volume
3:Excellent function
(gearbox)(reducer)(gear box)
Design characteristics:
1:Use low-carbon alloyed steel cementation processing completely.
2:The gear and the gear shft precision is high.
3:The volume small,but the torque is big.
(gearbox)(reducer)(gear box)
Technical data:
Model:HXG100-100D,HXG100-125D
Output speed n2(RPM):100
Rated output torque Mn2(Nm):7000
Rated input power Pn1(KW):75.0
Overhung loads Rn1(N):7900
Maintence:
After 300-hour operation, please change the oil, and flush the gear uint with suitable detergents.
Pls do not mix the mineral oil and synthetic oil.
pls check the oil level in regular time.
Storage:
1 :Pls do not store in outdoor.
2:pls put cardboard, wood or other material between the products and floor. the gear box cannot directly touch the floor.
Package:
Tips:
If you have any question, pls contact us freely.
2:Compact design,small volume
3:Excellent function
(gearbox)(reducer)(gear box)
Design characteristics:
1:Use low-carbon alloyed steel cementation processing completely.
2:The gear and the gear shft precision is high.
3:The volume small,but the torque is big.
(gearbox)(reducer)(gear box)
Technical data:
Model:HXG100-100D,HXG100-125D
Output speed n2(RPM):100
Rated output torque Mn2(Nm):7000
Rated input power Pn1(KW):75.0
Overhung loads Rn1(N):7900
Maintence:
After 300-hour operation, please change the oil, and flush the gear uint with suitable detergents.
Pls do not mix the mineral oil and synthetic oil.
pls check the oil level in regular time.
Storage:
1 :Pls do not store in outdoor.
2:pls put cardboard, wood or other material between the products and floor. the gear box cannot directly touch the floor.
Package:
Tips:
If you have any question, pls contact us freely.
Go-kart gearbox
High precision gear set;
Good contact match;
Apply in ATV gearbox .
Aluminum Die casting ATV gearbox.
Mostly applied on ATV,Go-kart cars.
The inside spur cylindrical gears were maked by shaving process with strong capacity.
Ratio available: 9:1,11:1,5:1
Weight :18.5kg
Good contact match;
Apply in ATV gearbox .
Aluminum Die casting ATV gearbox.
Mostly applied on ATV,Go-kart cars.
The inside spur cylindrical gears were maked by shaving process with strong capacity.
Ratio available: 9:1,11:1,5:1
Weight :18.5kg
Gearbox
1.offer various DC motors contained planetary motor, rc servo motor,etc
2.high quality and good price
3.OEM service available
We Shenzhen HuaYueXin Precise ware Co., Ltd. is professional and technical experience in the production of following products:
A. Powder metallurgy products are made of bronzeiron and stainless steel as raw materials which are as following:gear wheel,worm wheel,worm, metals injection shaping;
B. Plastics products are made of POM,nylon,determine as raw materials.The products concerning as plastic gear wheel,worm wheel and other precise injection plastics;
C. And provide professional design, process various of minitype gear wheel reducer.
Welcome OEM purchasers!
For more information, please send email to us or call our free number ( Tel: +1-888-5527202, Fax: +1-888-5527191) if you are from A merica or Canada.
2.high quality and good price
3.OEM service available
We Shenzhen HuaYueXin Precise ware Co., Ltd. is professional and technical experience in the production of following products:
A. Powder metallurgy products are made of bronzeiron and stainless steel as raw materials which are as following:gear wheel,worm wheel,worm, metals injection shaping;
B. Plastics products are made of POM,nylon,determine as raw materials.The products concerning as plastic gear wheel,worm wheel and other precise injection plastics;
C. And provide professional design, process various of minitype gear wheel reducer.
Welcome OEM purchasers!
For more information, please send email to us or call our free number ( Tel: +1-888-5527202, Fax: +1-888-5527191) if you are from A merica or Canada.
TA30(Nomimal ratio iN=7)
1:Shaft mounted,hung work
2:Compact design,small volume
3:Excellent function
(gearbox)(shaft mounted gearbox)(speed reducer)
Design characteristics:
1:Use low-carbon alloyed steel cementation processing completely.
2:The gear and the gear shft precision is high.
3:The volume small,but the torque is big.
(gearbox)(shaft mounted gearbox)(speed reducer)
Technical data:
Model:HXG30D
Nomimal ratio iN:7
Output speed n2(RPM):194
Rated output torque Mn2(Nm):137
Rated input power Pn1(KW):2.9
Overhung loads Rn1(N):350
Maintence:
After 300-hour operation, please change the oil, and flush the gear uint with suitable detergents.
Pls do not mix the mineral oil and synthetic oil.
pls check the oil level in regular time.
Sto rage:
1:Pls do not store in outdoor.
2:pls put cardboard, wood or other material between the products and floor. the gear box cannot directly touch the floor.
Package:
Tips:
If you have any question, pls contact us freely.
2:Compact design,small volume
3:Excellent function
(gearbox)(shaft mounted gearbox)(speed reducer)
Design characteristics:
1:Use low-carbon alloyed steel cementation processing completely.
2:The gear and the gear shft precision is high.
3:The volume small,but the torque is big.
(gearbox)(shaft mounted gearbox)(speed reducer)
Technical data:
Model:HXG30D
Nomimal ratio iN:7
Output speed n2(RPM):194
Rated output torque Mn2(Nm):137
Rated input power Pn1(KW):2.9
Overhung loads Rn1(N):350
Maintence:
After 300-hour operation, please change the oil, and flush the gear uint with suitable detergents.
Pls do not mix the mineral oil and synthetic oil.
pls check the oil level in regular time.
Sto rage:
1:Pls do not store in outdoor.
2:pls put cardboard, wood or other material between the products and floor. the gear box cannot directly touch the floor.
Package:
Tips:
If you have any question, pls contact us freely.
16A Marine Gearbox
Type 16A Marine Gearbox is a kind of mechanically operated power transmission unit designed for small boats.
Speed Reduction Ratios for 16A Marine Gearbox:
Model
Nominal Reduction Ratio
Actual Reduction Ratio
Ahead Drive
Astern Drive
4 ZF 16A
4:1
3.83:1
3.61:1
3.5 ZF 16A
3.5:1
3.35:1
3.15:1
3 ZF 16A
3:1
2.95:1
2.95:1
2.5 ZF 16A
2.5:1
2.48:1
2.47:1
2 ZF 16A
2:1
2.07:1
2.16:1
Technical Data:
1. Rated Transmission Power: 0.0118 kw/ (r.min-1)
2. Rated Speed of Input Shaft: 2000 (r/min)
3. Rated Transmission Torque: 112.7 n.m
4. Rated Propeller Thrust: 3528 (360) N (kg)
5. Time Required for Reversing: ≤10 s
6. Force Applied to the Handle of Control Level while Reversing under Running
Conditions: 98~147 (10~15) N (kg)
7. Dir ection of Rotation of the Input Shaft (facing the output end): Left-handed turning (counter- clockwise)
8. Direction of Rotation of the Output Shaft at Ahead Position: Clockwise
9. Center Distance: 135 mm
10. Overall Dimensions(with connecting housing): 422×555×563 mm
11. Net Weight(with connecting housing): 92 kg
Speed Reduction Ratios for 16A Marine Gearbox:
Model
Nominal Reduction Ratio
Actual Reduction Ratio
Ahead Drive
Astern Drive
4 ZF 16A
4:1
3.83:1
3.61:1
3.5 ZF 16A
3.5:1
3.35:1
3.15:1
3 ZF 16A
3:1
2.95:1
2.95:1
2.5 ZF 16A
2.5:1
2.48:1
2.47:1
2 ZF 16A
2:1
2.07:1
2.16:1
Technical Data:
1. Rated Transmission Power: 0.0118 kw/ (r.min-1)
2. Rated Speed of Input Shaft: 2000 (r/min)
3. Rated Transmission Torque: 112.7 n.m
4. Rated Propeller Thrust: 3528 (360) N (kg)
5. Time Required for Reversing: ≤10 s
6. Force Applied to the Handle of Control Level while Reversing under Running
Conditions: 98~147 (10~15) N (kg)
7. Dir ection of Rotation of the Input Shaft (facing the output end): Left-handed turning (counter- clockwise)
8. Direction of Rotation of the Output Shaft at Ahead Position: Clockwise
9. Center Distance: 135 mm
10. Overall Dimensions(with connecting housing): 422×555×563 mm
11. Net Weight(with connecting housing): 92 kg
2011Single Screw reverse gearbox for plastic extruder ZLYJ280
reverse gearbox
1. This design is used JB/T9050.1-1999.
2. The hardness of gear is reached HRC54-62.
3. Low noise
ZLYJ Single-screw Plastic Extruder Reverse Gearbox Series
ZLYJ gearbox series are transmission devices, which are specially designed for single-screw extruder with high precision, hard gear surface, accompany with thrust. Adopting the technical specifications stipulated in JB/T9050.1-1999, all ZLYJ gearboxes are designed accordingly.
Main Features
:
1.High torque transmitting capacity..
2.High thrust load absorbing capacity.
3.Close grain cast iron housing..
4.Ample capacity precision bearing.
5.Case hardened and profile ground gears & pinions.
6.Long life torque transmitting elements..
7.Integrated cooling water coil
Type
Spec.
Output
power(KW)
Input (n)
Out put (n)
Output
torque
(N·m)
Axial
Thrust(KN)
Screw
Diameter
Length
Diamerer
Ratio
N.G
(KGS)
ZLYJ
280-16
75
960
60
7643
258
110
25:1
900
1. This design is used JB/T9050.1-1999.
2. The hardness of gear is reached HRC54-62.
3. Low noise
ZLYJ Single-screw Plastic Extruder Reverse Gearbox Series
ZLYJ gearbox series are transmission devices, which are specially designed for single-screw extruder with high precision, hard gear surface, accompany with thrust. Adopting the technical specifications stipulated in JB/T9050.1-1999, all ZLYJ gearboxes are designed accordingly.
Main Features
:
1.High torque transmitting capacity..
2.High thrust load absorbing capacity.
3.Close grain cast iron housing..
4.Ample capacity precision bearing.
5.Case hardened and profile ground gears & pinions.
6.Long life torque transmitting elements..
7.Integrated cooling water coil
Type
Spec.
Output
power(KW)
Input (n)
Out put (n)
Output
torque
(N·m)
Axial
Thrust(KN)
Screw
Diameter
Length
Diamerer
Ratio
N.G
(KGS)
ZLYJ
280-16
75
960
60
7643
258
110
25:1
900
Subscribe to:
Comments (Atom)